Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 6:20 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: SS Stewart restoration
PostPosted: Tue Aug 16, 2011 12:22 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
every saturady i leave at 7am for my weekly garage sales with my friend. I picked up an SS Stewart from a garage sale for 5 bucks with an unopened pack of D,Addario strings. my friend scored a nice mandolin (5 bucks) and uke (2 bucks) in excellent condition.

The Guitar is a flatop acoustic with a tailpiece and no bridge built in the 30's. The Machine heads are in excellent condition specially for a guitar built in the 30's. There is a crack across the entire fret board and a small open crack on the top. The paint is chipped in some areas.

I already started on my restoration. The neck was loose so i reglued it to the body with titebond and a few clamps. I started cleaning up and fixing the paint on the top and back of the guitar.


I will upload photos once i get home. and hopefully get this guitar restored within the next 2 weeks. bliss http://www.calgarc.com/?p=543


Top
 Profile  
 
PostPosted: Tue Aug 16, 2011 6:20 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
There are paint chips on the top back and sides of the guitar
Image

what i am using are some very expensive copic markers. I mix the colours on a piece of paper to get the right match for the guitar and use if for smaller touchups, once it dries i will apply some light finish an polish it using either olive or almod oil (natural :D )

Image

some of the finish work fixed on the top of the guitar
Image


the fretboard and neck have been reglued and clamped. removed the clamps yesterday

Image
Image

i also started sanding off some rust on the tailpiece, but i will probably get a new one :D
Image

and the best part of this 5 dollar beater is the head stock
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com